aufrufen

aufrufen

Enclosure, Box Diecast, IP65, NEMA 4, Multipurpose, 98 mm, 64 mm, 34 mm, Aluminium, Silver RoHS Compliant: Yes

aufrufen

Heyco® Rubber Grommets

aufrufen

RG 375-4-3 Heyco Rubber Grommets for Mounting hole size 0.375 and for Panels up to 0.094 Inch thick and Inner hole diameter of 3,2. Material?SBR

aufrufen

aufrufen

SHEARS ADJUSTABLE TENSION

aufrufen

aufrufen

Heyco® Rubber Grommets

aufrufen

Cable Accessories Grommet Styrene Butadiene Rubber Black Heyco®

aufrufen

Heyco® Rubber Grommets For Panels up to .063 (1.6 mm) Thick

aufrufen

Raceway Duplex Outlet - Gold Finish

aufrufen

Cable Accessories Nonmetallic Conduit Polyvinyl Chloride Gray

aufrufen

aufrufen

Hubbell Miscellaneous

aufrufen

"""Mersen HP12NH photovoltaic (PV) fuse series was engineered and designed specifically for the protection of photovoltaic systems. Helio-Protection® HP12NH fuse links are designed for the protection of cables in a PV group of chains when a short circuit occurs in a panel (main fuse category). This HelioProtection® main fuse range enlarges our PV fuse links offering on a size having a worldwide acceptance. They are of the gPV type and comply with both IEC 60269-6 and UL 2579 PV standards.They are also available with bolted type blades for direct mounting."""

aufrufen

"""The NH system is classified among plug-in fuse systems and is composed of:* fuse-base, (possibly including terminal covers and phase barriers)* fuse-link with blade contact* fuse-link replacement device (LV HRC fuse puller)Since the design of this system cannot guarantee non-interchangeability of rated current, it must be handled by a qualified professional.NH-fuse links „gTr“ are used for the protection of transformers. The time/current characteristic is especially adapted to that of the protected transformer and implies optimal selectivity to NH-fuse links characteristic gG. The fuses can be loaded with 1,3 times nominal current for up to 10 hours. The fuse link operates at 1,5 times nominal transformer current within 2 hours."""

aufrufen

The fuse complies with standard EN 60269-2 section II and standard BS 88 part 2. These fuses are designed for : “General purpose use” motor protection (gM type). This fuse range insures an excellent current limitation for all overloads on a large range of applications. Their size cannot allow exchange by other fuses of higher rating in their range. They are screwed into fuseholders or bolted directly onto busbars, or in fuse interruptors disconnectors.

aufrufen

"""Mersen HV fuse-links have been used for reliable protection in high-voltage switchgear and controlgear and high-voltage systems for decades.For the Limitor®-PTS range, Mersen innovates with new fuse-element designs to reduce power losses and new thermal striker to prevent overheating in the fuse compartment of the switch gear.Mersen uses the best materials : fuse-elements are in pure silver, caps are in copper coated with silver and body is in ceramic.Limitor®-PTS HV fuse-links are dedicated to protect transformers in combination with air or gas insulated switchgear against the thermal and dynamic effects of short-circuits.Siemens and Ormazabal recommend Limitor®-PTS HV fuses to be used in their gas-insulated switchgear."""

aufrufen

Programmable Power Supplies

aufrufen

Programmable Power Supplies