aufrufen

0807009 Phoenix Contact GPE 45X14 SR/R

aufrufen

GearWrench / SET SKT STD/DP 1/2DR 6PT 49PC SAE/MET

aufrufen

SET SKT SAE/MET 1/2DR 6PT 49PC

aufrufen

EXT O= .500,L= 1.50,W= .055

aufrufen

80700-M005

aufrufen

Cable Accessories Boot Polyolefin Black

aufrufen

Unscreened Backshells & Adapters

aufrufen

807-003-6-4SN

aufrufen

250-5GAL-40LBS/UNIT# 3M(TM) Scotchcast(TM) Electrical Resin 250 Part A (40 lb)

aufrufen

250-5GAL-40LBS/UNIT# 3M(TM) Scotchcast(TM) Electrical Resin 250 Part B (40 lb)

aufrufen

3M™ Scotchcast Electrical Resin 282 is buff colored, can be applied by dipping, spraying, extruding or troweling. As dipping resin, 282 provides exceptionally smooth and uniform coatings with minimal runoff or sag during cure and is suggested for those applications requiring high temperature stability and permanent flexibility for thermal and mechanical shock resistance. examples are dipping and encapsulation of coils, transformers, motors, modules, strain- sensitive circuitry and other electrical and electronic components. Gel time is 23 min at 121(deg)C.

aufrufen

3M™ Scotchcast Electrical Resin 280 is characterized by a high temperature rating, outstanding physical and electrical stability and superior resistance to moisture. Resin system 280 remains flexible even after prolonged heat aging, while its low viscosity and fine wetting properties allow complete impregnation of fine wires in coils. Resin 280 is well suited to impregnating, potting and encapsulating applications that require superior electrical performance, maximum resistance to moisture and thermal shock resistance. Gel time is 20 min at 121(deg)C.

aufrufen

3M™ Scotchcast Electrical Resin 252 is a 100% solids thixotropic, rigid, Class F system, which is widely used in dip coating and wet winding applications where physical strength and excellent electrical properties at elevated temperatures are required. Smooth and uniform coatings can be achieved with minimal dripping or runoff during cure. Gel time is 21 min at 121(deg) C.

aufrufen

3M™ Scotchcast Electrical Resin 241 is a medium viscosity, semi-flexible, two-part, heat-curing, brown pigmented, 100% solids epoxy resin system. This general purpose resin system has built-in flexibility, good adhesion, terminal shock and impact resistance, and stable electrical and physical properties at 130(deg)C. (Class B) continuous operation. This filled resin system is used where higher thermal conductivity and greater mechanical strength are required.

aufrufen

3M™ Scotchcast Electrical Resin 235 system has permanent semi-flexibility, thermal shock and impact resistance, good electrical and adhesion properties. This low viscosity resin is well suited to a variety of general purpose, Class B applications. Its low viscosity and good wetting characteristics allow complete impregnation of even small coils, and it has the mechanical strength and flexibility needed for high quality insulation of large castings, such as motors, transformers, and coils. Gel time 18 min at 120(deg)C.

aufrufen

250-1GAL-10LBS/KIT# 3M(TM) Scotchcast(TM) Electrical Resin 250 (10 lb)

aufrufen

3M™ Scotchcast Electrical Resin 241 is a medium viscosity, semi-flexible, two-part, heat-curing, brown pigmented, 100% solids epoxy resin system. This general purpose resin system has built-in flexibility, good adhesion, terminal shock and impact resistance, and stable electrical and physical properties at 130(deg)C. (Class B) continuous operation. This filled resin system is used where higher thermal conductivity and greater mechanical strength are required.

aufrufen

3M™ Scotchcast Electrical Resin 253 is a 100% solids, two-part, oven-curing, semi-flexible, filled, brown epoxy resin capable of operating continuously at 130(deg)C. the thixotropic nature of this product renders it readily applicable by dipping, extrusion or trowelling in applications where resistance to running or sagging is a requirement. The properly cured product exhibits permanent flexibility, good adhesion, good thermal and mechanical shock resistance and good thermal conductivity. Typical examples of applications where this product can be used are as a conformal coating for coils, transformers, motors, modules, electrical and electronic components or assemblies, and for buttering motor turns. Gel time is 23 min at 120(deg)C.

aufrufen

3M™ Scotchcast Electrical Resin 251 is a medium viscosity, rigid, Class F resin system widely used where physical strength and excellent electrical properties at elevated temperatures are required. An easy 1:1 mix ratio and good handling characteristics have contributed to the products popularity.

aufrufen

241-5GAL-23.3LBS/UNIT# 3M(TM) Scotchcast(TM) Electrical Resin 241 Part A (23.3 lb)