
Die Bilder dienen nur als Referenz Siehe Produktspezifikationen
DRV8432DKD Datenblatt

| Telefon | Teilenummer | Paket | Beschreibung |
|---|---|---|---|
| DRV8432DKD | 36-BSSOP (0.433, 11.00mm Width) Exposed Pad | TEXAS INSTRUMENTS - DRV8432DKD . - Driver / Contrôleur de moteur pont complet, Alimentation 0V à 52,5V, 2 Sorties 30V/14 A, HSSOP-36 | |
| DRV8412DDWR | 44-TSSOP (0.244, 6.20mm Width) Exposed Pad | 6A Dual Brushed DC or Single Bipolar Stepper Motor Driver (PWM Ctrl) 44-HTSSOP -40 to 85 | |
| DRV8412DDW | 44-TSSOP (0.244, 6.20mm Width) Exposed Pad | IC MOTOR DRIVER, FULL BRIDGE, 6A,HTSSOP-44 | |
| TPS2205IDAP | 32-PowerTSSOP (0.240, 6.10mm Width) | TEXAS INSTRUMENTS TPS2205IDAP.PC Card Power Interface Switch for Parallel PCMCIA Controllers, 2 Outputs, 13.5V, 2.2A, HTSSOP-32 | |
| LTC1338CG#PBF | 28-SSOP (0.209, 5.30mm Width) | IC TRANSCEIVER FULL 5/3 28SSOP |
It is a high voltage, high current dual full-bridge driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Two enable inputs are provided to enable or disable the device independently of the input signals.
PWM (Pulse Width Modulation) is an efficient way to vary the speed and power of electric DC motors. Here two drivers are described for 24 V (15 V to 30 V) motors with a maximum current up to 80 A. These drivers can for example be used to vary the speed of small electric vehicles.
This driver allows up two DC motors to be independently controlled in both forward and reverse directions via a microcontroller such as an Arduino. Alternatively, the module is capable of driving a single 4 input stepper motor.
Datenblatt
| Menge. | Stückpreis |
|---|---|
| 1+: | $19.00953 |
| 10+: | $17.93352 |
| 100+: | $16.91841 |
| 500+: | $15.96076 |
| 1000+: | $15.05733 |
Sie haben nicht den gewünschten Preis?
Füllen Sie die Formulare aus und wir werden Sie so schnell wie möglich kontaktieren.
