Description
The AT25FS010 provides 1,048,576 bits of serial reprogrammable Flash memory organized as 131,072 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operation are essential. The AT25FS010 is available in a space-saving 8-lead JEDEC SOIC and 8-lead Ultra Thin SAP packages.
Features
• Serial Peripheral Interface (SPI) Compatible
• Supports SPI Modes 0 (0,0) and 3 (1,1)
– Datasheet describes Mode 0 Operation
• 50 MHz Clock Rate
• Byte Mode and Page Mode Program (1 to 256 Bytes) Operations
• Sector/Block/Page Architecture
– 256 byte Pages per Sector
– Eight 4 Kbyte Sectors per Block
– Four uniform 32 Kbyte Blocks
• Self-timed Sector, Block and Chip Erase
• Product Identification Mode with JEDEC Standard
• Low-voltage Operation
– 2.7V (VCC = 2.7V to 3.6V)
• Hardware and Software Write Protection
– Device protection with Write Protect (WP) Pin
– Write Enable and Write Disable Instructions
– Software Write Protection:
• Upper 1/32, 1/16, 1/8, 1/4, 1/2 or Entire Array
• Flexible Op Codes for Maximum Compatibility
• Self-timed Program Cycle
– 30 µs/Byte Typical
• Single Cycle Reprogramming (Erase and Program) for Status Register
• High Reliability
– Endurance: 10,000 Write Cycles Typical
• 8-lead JEDEC 150mil SOIC and 8-lead Ultra Thin Small Array Package (SAP)
• Die Sales: Waffer Form, Tape and Reel, and Bumped Waffers