TLC27M2 - Texas Instruments

Die Bilder dienen nur als Referenz Siehe Produktspezifikationen

Kynix Teil #: KY20-TLC27M2
Hersteller Teil #: TLC27M2
Produktkategorie: Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Hersteller: Texas Instruments
Beschreibung:
Verpackung:
Menge:
Bleifrei-Status / RoHS-Status: Bleifrei / RoHS-konform
Vorlaufzeit: 3(168 Hours)
Spezifikationen
Attribute
Attribute Value
Surface Mount  
YES
Number of Pins  
8
Operating Temperature (Max.)  
70°C
JESD-609 Code  
e4
Pbfree Code  
yes
Moisture Sensitivity Level (MSL)  
1 (Unlimited)
Number of Terminations  
8
ECCN Code  
EAR99
Terminal Finish  
Nickel/Palladium/Gold (Ni/Pd/Au)
HTS Code  
8542.33.00.01
Packing Method  
TR
Voltage - Supply  
5V
Terminal Position  
DUAL
Terminal Form  
GULL WING
Peak Reflow Temperature (Cel)  
260
Number of Functions  
2
Terminal Pitch  
1.27mm
Time@Peak Reflow Temperature-Max (s)  
NOT SPECIFIED
JESD-30 Code  
R-PDSO-G8
Qualification Status  
Not Qualified
Power Supplies  
5/10V
Temperature Grade  
COMMERCIAL
Supply Current-Max  
0.56mA
Slew Rate  
0.46 V/us
Architecture  
VOLTAGE-FEEDBACK
Amplifier Type  
OPERATIONAL AMPLIFIER
Common Mode Rejection Ratio  
91 dB
Unity Gain BW-Nom  
525 kHz
Average Bias Current-Max (IIB)  
0.00006μA
Low-Offset  
NO
Frequency Compensation  
YES
Supply Voltage Limit-Max  
18V
Low-Bias  
YES
Micropower  
YES
Bias Current-Max (IIB) @25C  
0.00006μA
Programmable Power  
NO
Input Offset Voltage-Max  
10000μV
Wideband  
NO
Power  
NO
Input Offset Current-Max (IIO)  
0.00006μA
Voltage Gain-Min  
25000
Common-mode Reject Ratio-Min  
65 dB
Length  
4.9mm
Height Seated (Max)  
1.75mm
Width  
3.91mm
RoHS Status  
Non-RoHS Compliant
Suche nach Teilenummer:TLC27M2 Enthaltenes Wort ist 0
Telefon Teilenummer Paket Beschreibung
Verwandte Teile in TLC27M2
TLC27M2 Verwandtes Stichwort.
  • TLC27M2 Preis
  • TLC27M2 Verteilers
  • TLC27M2 Hersteller
  • TLC27M2 Technische Daten
  • TLC27M2 PDF
  • TLC27M2 Datenblätter
  • TLC27M2 Bild
  • TLC27M2 Foto
  • TLC27M2 Teil
  • TLC27M2 Lagerbestand
  • TLC27M2 Inventar
  • TLC27M2 Angebotsanfrage
  • Kaufen TLC27M2
  • TLC27M2 Anfrage
  • TLC27M2 Onlinebestellung
Häufig gestellte Fragen

Die Bilder dienen nur als Referenz Siehe Produktspezifikationen
Kynix Teil #: KYundefined-undefined
Hersteller Teil #:
Produktkategorie:
Hersteller:
Beschreibung:
Verpackung:
Menge:
Bleifrei-Status / RoHS-Status Bleifrei / RoHS-konform
Vorlaufzeit: 3(168 Hours)
Datenblatt: datasheet  Datenblatt
Lagerbestand: 127602 Kann sofort geliefert werden
Stückpreis: aufrufen

Sie haben nicht den gewünschten Preis?
Füllen Sie die Formulare aus und wir werden Sie so schnell wie möglich kontaktieren.

Zahlungsmethode

Die Gebühr wird gemäß den Regeln von PayPal erhoben.
Bei einer Überweisung fallen US$30,00 Bankgebühren an.
Die Gebühr wird gemäß den Regeln von PayPal erhoben.
Western Union erhebt eine Bankgebühr von US$0.00.

VERSANDKOSTEN

DHL(www.dhl.com)
Ab $40.00 Grundgebühr für den Versand, abhängig von Zone und Land.
UPS(www.ups.com)
Ab $40.00 Grundgebühr für den Versand, abhängig von Zone und Land.
FedEx(www.fedex.com)
Ab $40.00 Grundgebühr für den Versand, abhängig von Zone und Land.
Einschreiben(www.singpost.com)
Ab $40.00 Grundgebühr für den Versand, abhängig von Zone und Land.

Paket

Schritt1 Produkt
Schritt2 Gehäuse Drivepipe
Schritt3 Antistatikbeutel
Schritt4 Verpackungskartons
Schritt5 Barcode-Versandetikett

Neueste Produkte


Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
PS10-PE-01P
DEGSON
PCB terminal blocks,Rated current: 57A,Rated voltage (III/2)450V,Cross section:10mm²,pitch:10.0mm,connector method:Screw connector with tension sleeve,Color:green-yellow,Contact surface :Tin
Mehr erfahren

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
DG126-7.5-02P
DEGSON
PCB terminal blocks,Rated current:18A,Rated voltage (III/2)450V,Cross section:2.5mm²,pitch:7.5mm,connector method:screw connector with wire protection,Color:green,Contact surface :Tin
Mehr erfahren

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
DG103-5.08-02P
DEGSON
PCB terminal blocks,Rated current:24A,Rated voltage (III/2)250V,Cross section:2.5mm²,pitch:5.08mm,connector method:Screw connector with tension sleeve,Color:green,Contact surface :Tin
Mehr erfahren

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
DG332J-5.0-02P
DEGSON
Needle connector,Rated current:12A,Rated voltage(III/2)250V,pitch:5.0mm,Color:black,Contact surface:Tin
Mehr erfahren

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
DG333J-3.5-02P
DEGSON
Needle connector,Rated current:12A,Rated voltage (III/2)250V,pitch:3.5mm,Color:black,Contact surface :Tin
Mehr erfahren

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
DG103-5.0-02P
DEGSON
PCB terminal blocks,Rated current:24A,Rated voltage (III/2)250V,Cross section:0.2-2.5mm²,pitch:5.0mm,connector method:Screw connector with tension sleeve,Color:green,Contact surface :Tin
Mehr erfahren

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
DG332JR-5.0-02P
DEGSON
Needle connector,Rated current:12A,Rated voltage(III/2)250V,pitch:5.0mm,Color:black,Contact surface:Tin
Mehr erfahren

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
DG167-5.0-02P
DEGSON
PCB terminal blocks,Rated current:22A,Rated voltage (III/2)250V,Cross section:2.5mm²,pitch:5.0mm,connector method:screw connector with wire protection,Color:green,Contact surface :Tin
Mehr erfahren

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
DG167-7.62-02P
DEGSON
PCB terminal blocks,Rated current:22A,Rated voltage (III/2)450V,Cross section:2.5mm²,pitch:7.62mm,connector method:screw connector with wire protection,Color:green,Contact surface :Tin
Mehr erfahren

Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
DG500A3-5.08-06P
DEGSON
PCB terminal blocks,Rated current: 18A,Rated voltage (III/2)250V,Cross section:1.0-2.5mm²,pitch:5.08mm,connector method:Screw connector with tension sleeve,Color:green,Contact surface :Tin
Mehr erfahren